uPAC-5001D-CAN2 CR, 2-port CAN Programmable Controller with Series Port, Ethernet port, 7-segment Display and Programmable LEDs.
uPAC-5001D-CAN2 CR
2-port CAN Programmable Controller with Series Port, Ethernet port, 7-segment Display and Programmable LEDs.
Free Shipping
Features
Compatible with CAN specification 2.0 parts A and B
Programmable transfer rate up to 1 Mbps
Jumper select 120Ω terminal resistor for CAN channel
Supports a variety of TCP/IP features, including TCP, UDP, IP, ICMP, ARP
Supports TCP/IP, Modbus, CAN library.
Supports various storage media, 512 KB Flash, 16 KB EEPROM, .microSD
64-bit hardware unique serial number inside
COM driver support interrupt & 1KB QUEUE Input & Output buffer
COM port: COM1, COM2
Build-in WDT
Built-in RTC, NVRAM, EEPROM
Built-in self-tuner ASIC controller on RS-485 port
Built-in ICP DAS's MiniOS7 and it is upgradable.
Redundant Power Inputs
Program download port: COM1 or Ethernet Port
Introduction
The uPAC-5001D-CAN2 is palm size PACs (Programmable Automation Controller). With abundant and various peripherals and communication ports, the uPAC-5001D-CAN2 can integrate different communication interface, like CAN bus, RS-232, RS-485, Ethernet and so on. In order to increase the modules openness and applications flexibility, the uPAC-5001D-CAN2 provides DOS-like real-time single-task operation system for adapting to all kinds of needs. Users can develop application programs via C/C++ compiler. In respect of application development, the uPAC-5001D-CAN2 also provides various libraries and demo programs about the peripheral components. Users may be confused how to use those abundant libraries. For this purpose, the uPAC-5001D-CAN2 provides demo programs about libraries. When users need to use various peripheral like communication ports, watch dog, real-time clock (RTC), seven-segment display, reading/accessing into flash, EEPROM, microSD, even using 64-bit hardware unique series number to protect the development of application software, they can be completed easily and quickly to meet all kinds of needs for application program development by revising and combining these sample programs. In order to work under harsh environment, the uPAC-5001D-CAN2 was designed with low power consumption and fanless products. Besides, it adds all manner of anti-jamming protection components on circuit design and meets requirements of the wide operating temperature and wide operating voltage. Basis of all features which were described previously, the uPAC-5001D-CAN2 is an ideal for data collection which is applied to integrate all kinds of communication interface or as a data processing center. It is also designed to convert different protocol network such as gateway or bridge devices.
Applications
CAN bus communication application
Industry automation
Auto detecting CANopen slave devices
IO monitor
High speed data acquisition system
Process monitor and control
Factory automation
Laboratory automation
Communication switching
Specifications
CPU Module
CPU: 80186 or compatible (16-bit and 80 MHz)
64-bit Hardware Serial Number: Yes, for Software Copy Protection
EEPROM: 16KB
Flash: 512 KB; Erase unit is one sector (64 K bytes); 100,000 erase/write cycles
SRAM: 512 KB
Storage Expansion: Yes, can support 1 or 2 GB microSD
Real Time Clock: Yes
Watchdog Timer: Yes( 0.8 second)
LED Indicators
Status: 5 x Programmable
COM Ports
Ports: 1x RS-232 (Download Port)
1 x RS-485 (with internal self-tuner ASIC)
Ethernet
Ports: RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
CAN
Controller: NXP SJA1000T with 16 MHz clock frequency
Ports: 2
Baud Rate: 5 k ~ 1 M bps
Terminal Resistor: Jumper for the 120 Ω terminal resistor
Specification: ISO 11898-2, CAN 2.0A and CAN 2.0B
Power
Input Range: +12 ~ +48 VDC
Consumption: 2.5 W
Mechanical
Casing: Plastic
Dimensions (mm): 91 x 123 x 52 (W x L x H)
Installation: DIN-Rail
Environment
Operating Temperature: -25 ~ +75 °C
Storage Temperature: -30 ~ +80 °C
Humidity: 10 ~ 90% RH, Non-condensing