
SG-3016-80-G CR
Strain Gauge Input Signal Conditioner with 80 Hz Low Pass Filter
Free Shipping
Features
Three-way isolation: 1000 Vdc
Accuracy: ±0.1% of full range
Easy to configure input/output range
Three VRs for calibrating accuracy of the input/ output range
Flexible DIN-rail
Introduction
The SG-3016-80 is a voltage input to voltage or current output signal conditioning module. It has 1000 Vdc three-way isolation for input, output and power. It also can change the input/output range via internal configuration switches. The SG-3016-80 has an LED display to show whether the SG-3016-80 is functioning correctly and has three VRs (Zero, Span, Exci) to calibrate accuracy of the input/output range. The bandwidth of the SG-3016-80 is typically 80 Hz. It is easy to mount the SG-3016-80 on a standard DIN rail and operate in environments with wide temperature range.
Specifications
Isolation
Three-way Isolation: 1000 VDC
Analog Input
Channels: 1
Type: ±10 mV, ±20 mV, ±30 mV, ±50 mV, ±100 mV
Accuracy: ±0.1% of full range
Bandwidth: <80 Hz
Analog Output
Channels: 1
Range: Voltage: 0 ~ 5 VDC, 0 ~ 10 VDC, ±5 VDC, ±10 VDC
Current: 0 ~ 20 mA
Current Load Resistance: 0 ~ 500 Ω (Source)
Excitation Voltage Output
Channels: 1
Range: 0 ~ +10 VDC
Max. Load Current: +20 mA
Power
Reverse Polarity Protection: Yes
Input Range: +10 ~ +30 VDC
Consumption: 1.44 W (Voltage Output), 1.74 W (Current Output)
Mechanical
Dimensions (mm): 25 mm x 114 mm x 70 mm (W x L x H)
Environment
Operating Temperature: -25 °C ~ 75 °C
Storage Temperature: -30 °C ~ 75 °C
Humidity: 5 ~ 95%, non-condensing