PET-7219Z/S CR ICP DAS Analog IO Modules

The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7019Z/PET-7019Z/ET-7219Z/PET-7219Z is specifically designed for extremely accurate thermocouple measurement and features automatic coldjunction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.
PET-7019Z/S2 CR: PoE Ethernet I/O Module with 10-ch universal AI, 6-ch DO with DN-1822 Daughter Board and a 1.8 m Cable with PoE (RoHS)

• Built-in Web Server
• Web HMI
• Support for both Modbus TCP and Modbus UDP Protocols
• Communication Security
• 2-port Ethernet Switch for Daisy-Chain Topology
• Dual Watchdog
• Wide Opearting Temperature Range:
• I/O Pair Connection
• Built-in I/O
• AI: 10 Channels with 240 Vrms Overvoltage Protection
• DO: 6/3 Channels 

Software

Built-In Web Server: Yes
Web HMI: Yes
I/O Pair Connection: Yes

Communication

Ethernet Port: 2 x RJ-45, 10/100 Base-TX, Swtich Ports
PoE: Yes
Protocol: Modbus/TCP, Modbus/UDP
Security: ID, Password and IP Filter
Dual Watchdog: Yes, Module (0.8 second), Communication (Programmable)

LED Indicators

for System Running: Yes
for Ethernet Link/Act: Yes
for DI/DO status: Yes
for PoE Power: Yes

2-Way Isolation

Ethernet: 1500 VDC
I/O: 2500 VDC

EMS Protection

ESD (IEC 61000-4-2): 4 kV Contact for Each Terminal and 8 kV Air for Random Point
EFT (IEC 61000-4-4): +/-4 kV for Power

Power Requirements

Reverse Polarity Protection: Yes
Powered from Terminal Block: 12 ~ 48 VDC
Powered from PoE: Yes, IEEE 802.3af, Class1
Consumption: 3.6 W (Max.)

Mechanical

Dimensions (W x L x H): 76 mm x 120 mm x 38 mm
Installation: DIN-Rail or Wall mounting

Environmental

Operating Temperature: -25 ~ +75°C
Storage Temperature: -30 ~ +80°C
Humidity: 10 ~ 90% RH, Non-condensing 

I/O Specifications

Thermocouple Input

Channels: 10 (Differential):

• Sensor Type:  +/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV, +/-500 mV,
• +/-1 V, +/-2.5 V, +/-5 V, +/-10 V,
• +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
• Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710)

Individual Channel Configuration: Yes
Resolution: 16-bit
Sampling Rate: 10 Samples/Second (Total)
Accuracy: +/-0.1% of FSR or better
Zero Drift: +/-0.5 μV/°C
Span Drift: +/-25 ppm/°C
Over Voltage Protection: 240 Vrms
Input Impedance: >300 kΩ
Common Mode Rejection: 86 dB Min.
Normal Mode Rejection: 100 dB
Temperature Output Consistency: Yes
Stable Temperature Output in the Field: Yes
Open Wire Detection: Yes
Virtual Channel to Channel Isolation: +/-400 VDC

Digital Output

Channels: 5
Type: Isolated Open Collector
Sink/Source (NPN/PNP): Sink
Max. Load Current: 700 mA/Channel
Load Voltage: 5 VDC ~ 50 VDC
Overvoltage Protection: 60 VDC
Overload Protection: 1.4 A
Short-circuit Protection: Yes
Power-on Value: Yes, Programmable
Safe Value: Yes, Programmable