M-7016D-G CR
2-ch 4-wire Strain Gauge Input Module with LED Display, using DCON and Modbus Protocols (Gray Cover)
Analog Input
Input Channels: 2
Input Type: +/-15mV, +/-50mV, +/-100mV,+/- 500mV , +/-1V,+/- 2.5V, +/- 20mA
Resolution: 16-bit
Sampling Rate: 10 Samples/ Second (one-channel mode)
2 Samples/ Second (two-channel mode)
Accuracy: +/-0.05% FSR
Band Width: 5.24Hz
Zero Drift: +/-0.5uV/ °C
Span Drift: 25ppm/°C
Common Mode Rejection: 150dB
Normal Mode Rejection: 100dB
Overvoltage Protection: 10V (P-P)
Input Impedance: 20M Ohms
Intra-module Isolation, Field to Logic: 3000 VDC
Excitation Voltage Output
Output Channels: 1
Output Range: 0 to +10V
Max Output Load: 40mA
Accuracy: +/-0.05% of FSR
Drift: +/-50ppm/ °C
Output Impedance: 12 Ohms
Isolation: 3000 VDC
Digital Input
Channels: 1
Logic Level 0: + 1V max
Logic Level 1: + 3.5V to 30V
Max Input Frequency: 50Hz
Min. Pulse Width: 1 mS
Digital Output
Channels: 4
Output Type: Sink, Open collector to 30V
Output Load: 30mA max per channel
Power dissipation: 300 mW
Interface
Interface:RS-485
Format: N, 8, 1
Baud Rate: 1200 ~ 115200 bps
LED Display
1 LED as Power/ Communication indicator
4 1/2 digits (for M-7016D)
Power
Input Voltage Range:+10 to +30Vdc
Power Consumption: 2.4W (M-7016) / 3.0W (M-7016D)
Protocol
Support Modbus and DCON Protocol: Yes
Environment
Operating temperature: -25 to 75°C
Storage temperature: -40 to 85°C
Humidity: 5 to 95% RH, non-condensing