M-7011D-G CR
1-ch Thermocouple Input Module with LED Display, using DCON and Modbus Protocols (Gray Cover)
Analog Input
Input Channels: 1
Input Type: +/-15mV, +/-50mV, +/-100mV,+/- 500mV , +/-1V,+/- 2.5V
+/- 20mA (requires optional external 125 ohm resistor)
Thermocouple( Type J, K, T, E, R, S, B, N, C)
Resolution: 16-bit
Sampling Rate: 10 Samples/ Second
Accuracy: +/-0.05%
Zero Drift: +/-0.5uV/°C
Span Drift: 25ppm/°C
Band Width: 5.24Hz
Common Mode Rejection: 150dB
Normal Mode Rejection: 100dB
Input Impedance: 20M Ohms
Intra-module Isolation, Field to Logic: 3000 VDC
Digital Input
Channels: 1
Logic Level 0: +1V max
Logic Level 1: +3.5V to 30V
Max Input Frequency: 50Hz
Min. Pulse Width: 1 ms
Digital Output
Channels: 2
Output Type: Sink, Open Collector to 30V
Output Load: 30mA max. per channel
Power dissipation: 300 mW
Interface
Interface: RS-485
Format: N, 8, 1
Baudrate: 1200 ~ 115200 bps
LED Display
1 LED as Power/ Communication indicator
4 1/2 digits (for I-7011D)
Power
Input: +10 to +30 Vdc
Power Consumption: 0.9 W (I-7011) / 1.5W(I-7011D)
Protocol
Support Modbus and DCON Protocol: Yes
Environment
Operating temperature: -25°C to 75 °C
Storage temperature: -30°C to 75 °C
Humidity: 5 to 95%, non-condensing