I-8411 CR ICP DAS MiniOS7 Based

• Provide multi Serial Port interface on back plane.
• COM1: RS-232
• COM2: RS-485
• COM3: RS-232/RS-485
• COM4: RS-232
• Provides a hardware serial number or an ASICKey to protect designated systems.
• The built-in watchdog circuit will reset the CPU module if a failure occurs in either the
  
• hardware or software, allowing the controller system more reliable and stable in harsh and noisy environments.
• Dual Bus designed to supports I-8K and I-87K series I/O modules, such as DI/DO, AI/AO, Counter/Frequency
• modules Compact I/O Expansion slot allows the quick installation of various 8K and 87K I/O modules
• Firmware updated via the RS-232 port
• Ventilated housing designed to operate between –25°C to +75°C
• Using DIN rail clips or Screw poles around the corners allows the control unit to be easily mounted on the box
• Frame Ground provides a path for bypassing ESD, allowing enhanced static protection (ESD)
  
• capability and ensures that the module is more reliable.
• Equipped with MiniOS7, ,an embedded OS similar to DOS that is developed by ICP DAS Co., LTD.
• Provides full C library functions such as 8K, 87K I/O, 7-segment LED, RTC (real time clock), EEPROM etc.

The I-8411/ I-8811 are serial embedded controller with 4/8 I/O slots. Both are equipped with MiniOS7,an embedded OS similar to DOS that is developed by ICPDAS Co., LTD.
The MiniOS7 can boot up in a very short time (0.4~0.8 second).It has built-in hardware diagnostic function, and supports the full functions to access all 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, Counter/Frequency, motion modules etc.
The I-8411/I-8811 back plane is equipped four serial COM Port, they include RS-232 and RS-485 ports and can be used in remote data acquisition and control applications, including environment monitoring, power management and factory automation. By using S-256 (256 KBytes) or S-512 (512 KBytes)battery backup SRAM, they provide data logger storage function.
Note: S256 and S512 are optional accessories.

CPU module

CPU: 80188 or compatible (8-bit and 40MHz)
SRAM: 512KBytes
Flash: 512KBytes
EEPROM: 2KBytes
NVRAM: Yes
RTC (real time clock): Yes
Hardware Serial Number: Yes
Built-in Watchdog Timer: Yes

Communicate Interface

COM 0: Internal communication with the 87K modules
COM 1: RS-232 (to update firmware)
COM 2: RS-485
COM 3: RS-232/RS-485
COM 4: RS-232

SMMI

5 - Digit LED Display: Yes
3 - Programmable LED Indicators: Yes
4 - Push Buttons: Yes

I/O expansion slots

8411: 4 Slots
8811: 8 Slots

Dimensions

8411: 230mm x 110mm x 75.5mm
8811: 354mm x 110mm x 75.5mm

Operating Environment

Operating Temperature: -25°C to +75°C
Storage Temperature: -30°C to +85°C
Humidity: 5 ~ 95%,non-condensing

Power

Protection: Power reverse polarity protection
Power requirement: 10 ~ 30 V/DC
Power supply: 20W
Power consumption: 
                      I-8411: 3.9 W
                      I-8811: 5.1 W