I-7567 CR
USB To HART Protocol Converter with Software Setup Utility. Compatible with USB 1.1 and 2.0 standard. Microsoft Windows 2000/Vista/XP/7 Drivers Included. Supports operating temperatures between -25 to 75°C
- Support HART Short/Long frame
- Support HART Burst mode
- Support point-to-point or multi-drop HART mode
- Support connecting up to 15 HART slave devices
- Allow two HART masters
- Provide utility tool for module configuration and HART communication
- No external power supply (powered by USB)
- Support firmware update via USB
- Provide PWR / Tx / Rx indication LED
- 4KV ESD Protection
- Selectable 250Ω load resistor
The I-7567 is a USB to HART converter specially designed as the master device of HART protocol. It allows users to access the HART slave via virtual COM-port of PC. When connecting I-7567 to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of HART network easier and quicker by applying I-7567. In addition, by using the I-7567 utility, users can configure module and test HART communication easily.
Interface
USB Port: USB Type B
Compatibility: USB 1.1 and 2.0 standard
Virtual COM Parameter: 1200 bps, O(odd parity), 8(data bit), 1(stop bit)
HART Interface
Channel: 1
Connector: 2-pin screwed terminal block
Terminator Resistor: Selectable 250 Ω terminator resistor
4KV ESD Protection: Yes, Contact for each terminal.
Isolation Voltage: 3000 VDC
LED
LED Display:
PWR: Power Indicator
Tx: Received Data from USB Indicator
Rx: Received Data from HART Indicator
Power
Power supply:By USB Interface
Power Consumption: Maximum: 1.5W
Software
Driver: Windows 2000 / XP / Vista / 7 (32/64 bit)
Mechanism
Installation: DIN-Rail or Wall Mounting
Dimensions: 108 mm x 72 mm x 35 mm (H x W x D)
Environment
Operating Temp: -25 ℃ ~ +75 ℃ (-13 to 167 ℉)
Storage Temp: -30 ℃ ~ +75 ℃ (-22 to 167 ℉)
Humidity: 5% ~ 95%, non-condensing