I-7565M-FD CR, USB to 2-port CAN/CAN FD Converter
I-7565M-FD CR
USB to 2-port CAN/CAN FD Converter
Free Shipping
Features
- Compatible with USB 2.0 (High Speed)
- Compatible with the ISO 11898-2 standard
- Compatible with CAN specification 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO (Bosch) standards switchable
- CAN FD bit rates for data field from 100 kbps to 10000 kbps
- Support CAN Bus message filter configuration
- Time stamp resolution 1ms.
- Voltage supply via USB
- Watchdog inside
- Built-in dip-switch to select 120 ohm terminal resister for CAN Bus
- Support firmware update via USB
- Provide utility tool for users module setting and CAN Bus communication testing conveniently
- Provide API library for user program development
Introduction
I-7565M-FD is a USB to CAN/CAN FD (CAN with Flexible Data-Rate) converter with two CAN channels. It allows transmitting/receiving CAN/CAN FD frames and supports CAN2.0A/2.0B and CAN FD (ISO/Bosch) specifications and different baud rates for CAN/CAN FD frame. (10 kbps to 1000 kbps for CAN arbitration phase and 100 kbps to 10000 kbps for CAN FD data phase). When connecting I-7565M-FD to PC, PC will load the relevant device driver automatically (hot plug & play). Therefore, users can make data collection and processing of CAN Bus network easier and quicker by applying I-7565M-FD. The application fields can be CAN Bus monitoring, building automation, remote data acquisition, environment control and monitoring, laboratory equipment & research, factory automation, etc. The following is the application structure for the USB to CAN/CAN FD module. The PC can be the CAN host, monitor or HMI to access/control the CAN/CAN FD devices through the CAN network by the I-7565M-FD Converter. The module let users to communicate with CAN/CAN FD devices easily from PC with USB interface.
Specifications
Software
SDK: C#.Net, VB.Net, VC++.Net
LED Indicators:
Status: 1 x Power
1 x Module status
4 x CAN status
USB
Specification: USB 2.0 High Speed (480Mbps)
Connector: 1 x USB (Type B)
Driver: Built-in Windows 7/8.1/10
CAN
Ports: 2
Baud Rate: CAN bit rates: 10 k ~ 1 M bps,
CAN FD bit rates for data field: 100 k ~ 10M bps (*Note1)
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photocoupler
Terminal Resistor: DIP switch for the 120 Ω terminal resistor
Specification: ISO 11898-2, CAN 2.0 A/B and FD
Filter: Yes
Receive Buffer: 128 data frames
Data Flow: 3000 fps for Tx/Rx (Total CAN ports)
Power
Input Range: USB power delivery
Consumption: 1.5 W
Mechanical
Casing: Metal
Dimensions (mm): 111 x 102 x 27 (W x L x H)
Installation: Wall Mount
Environment
Operating Temperature: -25 ~ +75 °C
Storage Temperature: -30 ~ +80 °C
Humidity: 10 ~ 90% RH, Non-condensing