features and benefits
The I-7550 converter is specially designed for the slave device of PROFIBUS DP protocol.
It offers RS-232, RS-422, and RS-485 three kinds of communication way.
With the Hybrid COM 1 design, users can readily choose one type of com port to use.
By using this module, users can put their RS-232/422/485 devices into PROFIBUS network very easily.
- Protocol & Hierarchy : DP-V0 Slave
- Transmission Rate Setting : detected automatically
- Max Input Data Length : 128 Bytes
- Max Output Data Length : 128 Bytes
- Address Setting : 0~126 set by DIP switch
- Hybrid COM 1 : RS-232/422/485 with 'Self Tuner' inside
- Supports COM 1 Data Format : 7/8 data bits, No/Odd/Even parity, 1 stop bit
- Network Isolation Protection : High Speed iCoupler
- DC Isolation Protection : 3000VDC on PROFIBUS side
specifications
CPU Module| CPU | 80186, 80 MHz or compatible |
|---|
| EEPROM | 16 KB |
|---|
| Flash | 512 KB |
|---|
| SRAM | 512 KB |
|---|
| Watchdog Timer | Watchdog IC | CPU built-in |
|---|
LED Indicators| Status | PWR LED, RUN LED, ERR LED |
|---|
COM Ports| Ports | RS-232/RS-422/RS-485(can't be used simultaneously) | 3-pin screwed terminal block (RxD, TxD, GND) | 4-pin screwed terminal block (RxD+, RxD-, TxD+, TxD-) | 2-pin screwed terminal block (DATA+, DATA-) |
|---|
| Baud Rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
|---|
| Parity | None, Even, Odd |
|---|
| Data Bit | 7, 8 |
|---|
| Stop Bit | 1 |
|---|
PROFIBUS| Controller | Siemens SPC3 |
|---|
| Transceiver | ADI ADM2486 |
|---|
| Baud Rate | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
|---|
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
|---|
| Protocol | DP-V0 |
|---|
Mechanical| Dimensions (mm) | 72 x 33 x 119 (W x L x H) |
|---|
| Installation | DIN-Rail |
|---|
Environment| Operating Temperature | -25 ~ +75°C |
|---|
| Storage Temperature | -30 ~ +85 °C |
|---|
| Humidity | 5 ~ 95% RH, Non-condensing |
|---|
