F-8017C1 CR ICP DAS Current IO Modules

The F-8017C1 is a 16-bit, 8-channel analog differential input module. This module accepts current input range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for some application. The F-8017C1 provides 3000VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

F-8017C1 CR: 8-channel Isolated Current Input Redundant Module (Gray Cover)(RoHS)

• 8 current input channels
• Overrange measurement
• RoHs compliance
• 3000 VDC isolation from input to backplane
• 3000 VDC isolation from input to frame ground
• Redundancy
• Fast redundant switching time (<100us)

Feature

Redundant: Yes (Switching time < 100us)
Over-Current Protection: Yes
Termination board break off detection: Yes
LED indicator: 1 RUN, 1 ACT, 1 DUX

Analog Input

Number of Channels: 8
Type: 4 ~ 20 mA (Support ±25% overrange)
Maximum Allowable Input Current: 25 mA
Resolution: 16 bit
Sampling Rate: 500 Samples/sec (total)
Accuracy: ±0.05% FSR
Zero Drift: ±20 μV/°C
Common Mode Rejection: 86
Normal Mode Rejection: 100 dB
Input Impedance: 230 Ω
Data Range: -2500~12500 (0 ~ 24 mA)
Isolation: 3000 VDC 

Certification

EMC: EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4

General