ET-7219Z/S CR ICP DAS Analog IO Modules

The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7019Z/PET-7019Z/ET-7219Z/PET-7219Z is specifically designed for extremely accurate thermocouple measurement and features automatic coldjunction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.

ET-7219Z/S CR : Ethernet I/O Module with 2-port Ethernet Switch with 10-ch universal AI, 5-ch DO with DB-1820 Daughter Board (RoHS)

• Built-in Web Server
• Web HMI
• Support for both Modbus TCP and Modbus UDP Protocols
• Communication Security
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C
• 2-port Ethernet Switch for Daisy-Chain Topology
• I/O Pair Connection
• Built-in I/O 
  • AI: 10 Channels with 240 Vrms Overvoltage Protection
  • DO: 6/3 Channels

System Specifications

Software

Built-In Web Server: Yes
Web HMI: Yes
I/O Pair Connection: Yes

Communication

Ethernet Port: 2 x RJ-45, 10/100 Base-TX, Switch Ports
Protocol: Modbus TCP, Modbus UDP
Security: Password and IP Filter
Dual Watchdog: Yes, Module (0.8second), Communication (Programmable)

LED Indicators

For System Running: Yes
For Ethernet Link/Ack: Yes
For DI/DO Status: Yes

2-way Isolation

Ethernet: 1500 VDC
I/O: 2500 VDC

EMS Protection

ESD (IEC 61000-4-2): ±4 kV Contact for Each Terminal and 8 kV Air for Random Point
EFT (IEC 61000-4-4): ±4 kV for Power 
Power
Reverse Polarity Protection: Yes
Powered from Terminal block: +10 ~ +48 VDC
Consumption: 3.4 W

Mechanism

Dimension: 123mm x 72mm x 35mm (L x W x H)
Installation: DIN-Rail or Wall mounting

Environment

Operating Temp: -25°C ~ +75°C
StorageTemp: -30℃ ~ 80℃
Humidity: 10 ~ 90% RH, Non-condensing

I/O Specifications

Thermocouple Input 

Channels: 10 differential 
Type: +/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V -- +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable)
Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710)
Individual Channel Configuration: Yes
Resolution: 16-bit
Sampling Rate: 10 Samples/Second (Total)
Accuracy: +/-0.1% of FSR or better
Zero Drift: +/-0.5 μV/°C 
Span Drift: +/-25 ppm/°C
Overvoltage Protection: 240 Vrms
Virtual Channel to Channel Isolation:  +/- 400 VDC
Open Wire Detection: Yes
Input Impedance:  >300 kΩ 
Common Mode Rejection:  86 dB Min.
Normal Mode Rejection:  100 dB
Temperature Output Consistency: Yes
Stable Temperature Output in the Field: Yes
Virtual Channel to Channel Isolation: +/-400 VDC

Digital Output 

Channels: 5 
Type: Isolated Open Collector
Sink/Source (NPN/PNP): Sink
Max. Load Current: 700mA/Channel
Load Voltage: 5 VDC ~ 50 VDC
Overvoltage Protection: 60VDC
Overload Protection: 1.4 A
Short.circuit Protection: Yes
Power-on value: Yes, Programmable
Safe value: Yes, Programmable