Benvenuti sulla nostra nuova piattaforma ICP DAS
Che sostituisce

ET-7019Z/S CR ICP DAS Analog IO Modules


ET-7019Z/S CR

Ethernet I/O Module with 10-ch universal Analog input, 6-ch Digital output Includes DB-1820 Daughter Board



€ 388,21

(VAT excluded)

€ 473,62(VAT included)

Prezzo di 1 pz. iva (22%) inclusa: € 473,62

Availability: 15 business days

SKU: 93018

Model: ET-7019Z/S CR

Need Help?

  • Built-In Web Server
  • Web HMI
  • Modbus/TCP, Modbus/UDP Protocol
  • Communication Security
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • Dual Watchdog
  • Operating Temperature: -25 ~ +75 °C
  • I/O Pair Connection
  • Built-In I/O
  • AI: 8 Channels
  • DO: 4 Channels

The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7019Z/PET-7019Z/ET-7219Z/PET-7219Z is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field . Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for differe nt kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.
ET-7019/PET-7019 features an extremely excellent protection mechanism where overvoltage protection is up to 240 Vrms. It has wider input range for voltage compared to ET-7017. ET-7019/PET-7019 measures voltage from +/- 15 mV ~ +/- 10 V. Its input type also includes current and thermocouple. An intuitive design is kept in this model; choosing to measure current or voltage is simply by a jumper. An external resistor is no longer needed. Eight of its inputs channels can individually be configured with different kinds of analog input. What’s more, ET-7019/PET-7019 also got open thermocouple detection and many protection mechanisms. The 4 digital output can be set alarm output with Short-circuit protection and overload protection.


Built-In Web Server: Yes
Web HMI: Yes
I/O Pair Connection: Yes


Ethernet Port: 1 x RJ-45, 10/100 Base-TX
Protocol: Modbus/TCP, Modbus/UDP
Security: ID, Password and IP Filter
Dual Watchdog: Yes, Module (0.8 second), Communication (Programmable)

LED Indicators

L1 (System Running): Yes
L2 (Ethernet Link/Act): Yes
L3 (PoE Power): Yes

2 Way Isolaiton

Ethernet: 1500 VDC
I/O: 2500 VDC

EMS Protection

ESD (IEC 61000-4-2): 4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4): +/-4 kV for Power Line
Surge (IEC 61000-4-5): +/-0.5 Kv for Power Line
Power Requirements
Reverse Polarity Protectionn: Yes
Powered from terminal block: Yes, 10 ~ 30 VDC
Consumption: 2.6 W


Dimensions (W x L x D): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall mounting


Operating Temperature: -25 °C ~ +75 °C
Storage Temperature: -30 °C ~ +80 °C
Humidity: 10 ~ 90% RH, non-condensing

Analog Input

Input Channels: 10 (Differential)
Sensor Type: 
+/-15 mV, +/-50 mV, +/-100 mV, +/-150 mV,
+/-500 mV, +/-1 V, +/-5 V, +/-10 V
+/-20 mA, 0~20 mA, 4~20 mA
(J, K, T, E, R, S, B, N, C, L, M, LDIN43710)
Individual Channel Configuration: Yes
Resolution: 16-bit
Sampling Rate: 10 Samples/Sec. (Total)
Accuracy: +/-0.1% or better
Zero Drift: +/-10 μV/°C
Span Drift: +/-25 ppm/°C
Over Voltage Protection: 240 Vrms
Input Impedance: Voltage >1 MΩ
Current: 125 Ω
Common Mode Rejection: 86 dB Min.
Normal Mode Rejection: 100 dB
Open Wire Detection: Yes

Digital Output

Output Channels: 6
Type: Isolated Open Collector (Sink)
Max. Load Current: 700 mA/Channel
Load Voltage: 5 VDC ~ 50 VDC
Overvoltage Protection: 60 VDC
Overload Protection: 1.4 A
Short-circuit Protection: Yes
Power On Value: Yes, Programmable
Safe Value: Yes, Programmable