features and benefits
The ET-7017-10 is a module with 10-channel differential or 20-channel single-ended analog inputs.
It provides programmable input range on all analog channels (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA and 4 ~ 20 mA).
Each analog channel is allowed to configure an individual range and has 240 Vrms high overvoltage protection.
Each analog input can be programmed to accept voltage or current as input depending upon the position of the corresponding jumper.
The sampling rate of ET-7017-10 has two modes; fast mode and normal mode for your consideration.
ET-7017-10/PET-7017-10/ET-7217-10/PET-7217-10 also has qualification for 4 kV ESD protection as well as 3000 VDC intra-module isolation.
- Built-in Web Server
- Web HMI
- Support for both Modbus TCP and Modbus UDP Protocols
- Communication Security
- Dual Watchdog
- Built-in I/O
- AI: 10/20 Channels
specifications
SoftwareBuilt-in Web Server | Yes |
---|
CPU ModuleWatchdog Timer | Module, Communication (Programmable) |
---|
Isolation2-way Isolation | Ethernet: 1500 VDC | I/O: 2500 VDC |
---|
EMS ProtectionEFT (IEC 61000-4-4) | ±4 kV for Power Line |
---|
ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal | ±8 kV Air for Random Point |
---|
Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
---|
LED IndicatorsStatus | Run, Ethernet |
---|
Analog InputChannels | 10 differential or 20 single-ended (Note1), | software selectable |
---|
Type | Voltage | Current |
---|
Range | ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V | ±20 mA, 0 to 20 mA, 4 to 20 mA | (Jumper Selectable) |
---|
Resolution | 16-bit |
---|
Accuracy | Normal Mode: ±0.1% | Fast Mode: ±0.5% or better |
---|
Sampling Rate | Normal Mode: 10 Hz (total channels) | Fast Mode: 50 Hz (total channels) |
---|
Input Impedance | Voltage: 2 MΩ (Differential), 1 MΩ (Single-ended) | Current: 125 Ω |
---|
Common Voltage Protection | ±200 VDC |
---|
Overvoltage Protection | Differential: 240 Vrms | Single-ended: 150 Vrms |
---|
Overcurrent Protection | 50 mA at 110 VDC (max.) |
---|
Individual Channel Configuration | Yes |
---|
Open Wire Detection | For 4 to 20 mA only |
---|
Isolation | ±400 VDC, Virtual Channel to Channel Isolation |
---|
EthernetPorts | 1 x RJ-45, 10/100 Base-TX |
---|
Access Control | ID, Password and IP Filter |
---|
Protocol | Modbus TCP, Modbus UDP |
---|
PowerReverse Polarity Protection | Yes |
---|
Consumption | 2.8 W (max.) |
---|
Powered from Terminal Block | +10 to +30 VDC |
---|
MechanicalDimensions (mm) | 72 x 123 x 35 (W x L x H) |
---|
Installation | DIN-Rail mounting |
---|
EnvironmentOperating Temperature | -25 ~ +75 °C |
---|
Storage Temperature | -30 ~ +80 °C |
---|
Humidity | 10 to 90% RH, Non-condensing |
---|