DNM-843VI-800V CR, 3-channel 800 VDC Voltage Attenuator with channel to channel isolation (Metal)
DNM-843VI-800V CR
3-channel 800 VDC Voltage Attenuator with channel to channel isolation (Metal)
Free Shipping
Features
- AC/DC Source Input
- High Voltage Input Measurement
- Linear Attenuation Ratio
- High Input Impedance
- Channel to Channel Isolation for DN-848VI-10V,
- DN-848VI-80V, DN-848VI-150V and DN-843VI-600V
- Channel to Channel Isolation for DN-848VI-10V,
- DN-848VI-80V and DN-848VI-150V
- 4 kV ESD Protection
- 3 kV Surge Protection
- RoHS Compliance
- Operating Temperature: -25 °C ~ +75 °C
- Easily wire connection
Introduction
The DNM-800V series are voltage input attenuator. The maximum input range is from ±80 V to +/- 600 V and can be attenuated to ±10 V. The "I" version provide 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017 and I-87017 etc. to measure the high voltage.
Specifications
EMS Protection
ESD (IEC 61000-4-2): ±4 kV contact for power line, input and output channels, ±8 kV air for random point
Surge (IEC 61000-4-5): ±3 kV for power liner
Analog Input
Channels: 3
Type: AC/DC Voltage
Range: ±800 Vpp
Accuracy: 1% of FSR
Bandwidth: 30 KHz
Input Impedance: >1 MΩ
Channel-to-Channel Isolation: 3000 VDC
Intra-module Isolation: 3000 VDC
Analog Output
Channels: 3
Type: AC/DC Voltage
Range: ±10 Vpp
Power
Input Range: +10 VDC ~ +24 VDC
Consumption: 0.56 W
Mechanical
Casing: Metal
Dimensions (mm): 173 x 122 x 25 (W x L x D)
Installation: DIN-Rail Mounting
Environment
Operating Temperature: -25 ~ +75 °C
Storage Temperature: -30 ~ +75 °C
Humidity: 10 ~ 90% RH, Non-condensing