DN-831I-100V-200A CR
1 Channel Voltage Attenuator and 1 Channel Current Transformer (200 A) Includes CA-040415-1 Cable and ASO-003-1 Current Transformer
The DN-831I-100V-500A is 1-channel voltage attenuator and 1-channel current transformer. The maximum voltage input range is from +/- 100 V can be attenuated to ±10 V and the maximum current input range is from +/- 500 A can be attenuated to ±10 V. It provides 3000 VDC intra-modules isolation and 3000 VDC channel to channel isolation to avoid the noise interference from inputs to outputs or channel to channel. It can be used with the analog input modules such as I-7017, I-87017, M-7017RMS and I-87017W-RMS etc. to measure the high current.
- Highi Voltage Input and High Current Input Measurement
- Three Way Isolation
- Linear Attenuation Ratio
- High Input Impedance
- 3000 VDC Channel to Channel Isolation
- 4 kV ESD Protection
- 3 kV Surge Protection
- RoHS Compliance
- Easily wire connection
- Operating Temperature: -25 ~ +75 °C
High Current Input
Channels: 1
Input Type: AC/DC Current
Input Current Range: ±200 A
Output Voltage Range: +/-10 Vdc or 10 Vac
Accuracy: 1% of FSR
Isolation voltage: 2.5 KV @ 50 (60) HZ/1 min
Frequency bandwidth:0 ~ 50 KHz
High Voltage Input
Channels: 1
Input Type: AC/DC Voltage
Input Range: ±100 A
Output Range: +/-10 Vdc or 10 Vac
Accuracy: 1% of FSR
Frequency bandwidth: 20 Hz ~ 20 KHz
Isolation
Three Way Isolation: 3000 VDC ESD (IEC 61000-4-2): +/-4 kV contact for power line, input and output channels, +/-8 kV air for random point Input Range: +10 ~ +30 VDC Dimensions (W x L x H): 96 mm x 103 mm x 30 mm Operating Temp: -25 ~ + 75°CEMS Protection
Surge: +/-3 kV for power linerPower Input
Power Consumption: 1.8 WMechanical
Installation: DIN-Rail mountingEnvironment
Storage Temp: -30 ~ 75 ℃
Humidity: 10 to 90% RH, non-condensing