DB-16R CR
16-ch Relay Board
- Form C relays
- Accept 20-pin connector to control 16 form c relays for use with A-82X
- DIO-64 digital output port or any compatible digital output port
- Each LED light when corresponding relay is activated
- Screw terminals for field wiring
The DB-16R 16 channel Relay Output Board consists of 16 form c relays for efficient switch of load by programmed control. It is connector and functionally compatible with 785 series board but with industrial type terminal block. The DB-16R can be used by A-82x board or any other compatible board The relay are energized by apply 5 volt signal to the appropriate relay channel on the 20-pin flat cable connector . Sixteen enunciator LEDs ,one for each relay , light when their associated relay is activated . To avoid overloading your PC’s power supply ,this board provides a screw terminal for power supply.
Interface
Type: SPDT( form C )
Maximum input voltage: 24 VDC or 24 VAC
Nominal load: 0.5 A /120 VAC , 1A /24 Vdc
Max. Switching power: 60VA,24W
Max. Switching Voltage: 120VAC,60Vdc
Max. Switching Current: 1A
Life Expectancy: Mechanical ( 2 x 10 ) , Electrical ( 2 x 10 )
Release Time Value: Operate ( 6 ms )
Control Logic: Input TTL high (+5V) , relay on
Power
Power Consumption:
+12V @528mA max.
+5V @150mA max.
Dimension
Dimension: 205mm X 114mm
Environment
Operating Temperature: 0 -60°C
Storage Temperature: -20~70°C
Humidity: 5% to 90 % noncondensing