CAN-8424-G, DeviceNet Remote I/O Unit with 4 I/O Slots
CAN-8424-G
DeviceNet Remote I/O Unit with 4 I/O Slots
Free Shipping
Features
- DeviceNet Version : DeviceNet Specification Volume I & II, Release 2.0
- Number of Nodes : 64(Max)
- Support Message Groups : Group 2 only Server
- UCMM : Not Support
- I/O Operating Modes : Poll, Bit-Strobe, Change of State/ Cyclic
- No. of Fragment I/O : 128 Bytes (Max) (Input/ Output)
- MAC ID Setting : Rotary Switch
- Baud Rate Setting : Rotary Switch
Introduction
The CAN-8424 main unit based on the modular design offers many good features to the users and provides more flexibility in data acquisition and control system. In addition, ICP DAS also presents a CAN-8424 Utility tool to allow users to configure and create the EDS file for the specific IO modules plugged in. Therefore, users can easily apply the CAN-8424 embedded controller in DeviceNet network.
Specifications
CPU Module
CPU: 80186, 80 MHz or compatible
EEPROM: 16 KB
Flash: 512 KB
NVRAM: 31 bytes (battery backup, data valid for up to 10 years)
SRAM: 512 KB
Real Time Clock: Yes
Watchdog Timer: Watchdog IC
LED Indicators
Status: 1 x Power
2 x DeviceNet status
I/O Expansion
Slots: 4 slots
COM Ports
Ports: 1 x RS-232 (Utility Port)
9-pin male D-Sub (DTE: RxD, TxD, RTS, CTS, DTR, DSR, RI, GND)
DeviceNet
Controller: NXP SJA1000T with 16 MHz clock
Ports: 1
Connection Supported: 1 connection for Explicit Messaging
1 connection for Polled I/O
1 connection for Bit-Strobe I/O
1 connection for COS/Cyclic I/O
Baud Rate: 125 k, 250 k, 500 k
Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor: Jumper for 120 Ω terminal resistor
Specification: Volume I, Release 2.0 & Volume II, Release 2.0
Node ID: 0 ~ 63
Shutdown Message: Yes
Subscribe: Group 2 Only Server
Power
Input Range: +10 VDC ~ +30 VDC
Consumption: 2.5 W
Mechanical
Dimensions (mm): 188 x 132 x 91 (W x L x H)
Installation: DIN-Rail
Environment
Operating Temperature: -25 ~ +75 ℃
Storage Temperature: -30 ~ +80 ℃
Humidity: 10 ~ 90% RH, Non-condensing